Dolly Sods Wilderness · WV

Red Creek Trail

The main artery through the Dolly Sods backcountry, following Red Creek through its canyon past waterfalls, swimming holes, and multiple creek crossings; central to most loop backpacking routes here.

Live · updated

Skip the trail running plan today.

Today's best: trail running

Skip
Trail: prime
Air temp
73°F
Mostly Clear
Wind
13 mph
W
Rain
85%
Last 48h: 0.00″
Trail
prime
dirt surface
Sunset
8:34 PM
89 min daylight left
Moon
Full Moon
97% illuminated

Hiking

Ideal 48–75°F

Skip the hiking plan today.

Trail running

Ideal 42–65°F

Skip the trail running plan today.

  • · 73°F airWithin comfort range, outside ideal
  • ThunderstormsGet off exposed ridges before they arrive
  • Trail: primeNo meaningful rain in the last 48 hours. Trail surface is dry and tacky — prime traction.
  • 89 min of daylightYou need at least 102 min with margin. Bring a headlamp or start tomorrow.
Distance
6.4 mi
Elevation gain
277 ft
Surface
dirt
Difficulty
hard

Coordinates

39.0119, -79.3552 — WV.

Park

Part of Dolly Sods Wilderness.

Tick awareness

Peak nymphal tick activity — check yourself within 2 hours of leaving the trail.

How long is Red Creek Trail?

Red Creek Trail is a 6.4-mile route with 277 feet of elevation gain — hard — significant elevation gain, technical terrain, or both; come prepared. The trail facts panel on this page lists distance, surface, and access tags as they appear in OpenStreetMap.

What's the trail surface like at Red Creek Trail?

Red Creek Trail is natural dirt singletrack — soft underfoot, holds water, slow to dry after rain. Today's mud rating, derived from recent precipitation and the surface type, is shown in the conditions panel above.

Who manages Red Creek Trail, and where do closure alerts come from?

Red Creek Trail is in Dolly Sods Wilderness, which is managed by the managing agency. Closure and advisory data on this page comes from the agency. Always confirm against the park's own page before driving — emergency closures can post faster than scrapers refresh.

esc